PU ROD
· High load bearing capacity.
· More durable than conventional elastomers
· Good water resistance.
· High impact resistance.
PU ROD APPLICATION
They could be solid as well as hollow. The PU Rods are mainly used as Spring and Punch Mould functioning buffering or damping parts. As elastic parts, they are mainly used in the punching machine and other similar machines. They could not only protect the equipments but also assure the quality of the moulds. PU Rod are also widely used in other industries.
PU ROD SPECIFICATION
· Excellent resistance to wear.
· wide range of hardness.
· Operating temperature range.
· Good tear resistance and high flexural strength.
· Good flexibility and a small range of deformation after a long-term compression.
· Particularly good resistance to age
| Material: | 100% Virgin Polyether or Polyester |
| Surface: | Smooth/Smooth |
| Tensile Strength: | 25-55Mpa |
| Elasticity Impact: | >25% |
| Hardness: | 40-95Shore A |
| Elongation: | 400%-650% |
| Density: | 1.12-1.25g/cm3 |
| Tear strength: | 35-155KN/m |
| Akron Abrasion Loss: | <0.05cm3/1.61km |
| Compression set (22h*70C): | <10% |
| Working Temperature: | 120 |
· Other sizes, colors can be customized.
· Length, width, and thickness tolerances may vary by manufacturer
· Certain grades available in various colors.
· Minimums may apply to certain materials
